• pace9 - Solar Panels
  • pace9 - Solar Batteries
  • pace9 - Solar Energy Storage System
  • pace9 - Solar Electrical
  • pace9 - Solar Panel Fittings
  • pace9 - Solar Powered Fridge - Freezer
  • pace9 - Solar Street Light
  • pace9 - 2KW Solar Generator
  • pace9 - Inverters

Before we talk about 2KVA ELINA Solar Generator, let’s have a bit knowledge of how electricity are being generated.
The heart of most power plants is a turbine generator. This device creates a current when it turns, transforming mechanical energy into electrical energy.
Wind farms use large fan blades attached to turbine generators to catch the wind, converting the natural energy of moving air to electricity.
Traditional power plants burn coal or gas to heat water, and once the water comes to a boil, the resulting steam flows through pipes and turns the turbine generator.
Solar thermal plants use a series of mirrors to collect and intensify the sun’s rays to produce the necessary heat without the emissions created by burning fuel.
A solar power generator uses the sun’s energy to create electricity.
Photovoltaic panel converts sunlight directly into electrical current,
A solar thermal generator uses the sun’s heat to create electricity.
This technology have no carbon dioxide emission Unlike the traditional power generation which burns coal or natural gas thereby polluting the air with carbon dioxide emissions.
The above form of power generations are in a large scale but we need something that’s mobile which is the reason in the market today, you will see all sorts of fuel, diesel or gas generator (whatever you may call it) of any size. A Petrol or Diesel generator converts the chemical (petrol or diesel) energy into mechanical energy and then into electrical energy.
This possible because of the engine and an alternator. 
The petrol or diesel combusts in the engine, turning the rotor in the alternator.
The rotor is a coil of copper wire, the copper wire spins past stationary magnets. As copper wire passes over magnets, the magnets induce a slight electrical charge in the wire. This is done very fast and a significant amount of electricity is generated. What goes inside the generator is so complex that a layman might not understand. A lot of parts inside the generator moving while electricity is being generated by burning the petrol or diesel

Don’t forget how hazardous carbon dioxide emitting from the generator can be and the noise.

Don’t get me wrong, there are benefits associated to petrol or diesel generators, they can really be very small looking and still put out a large amount of electricity. Most of them are very easy to operate and get going all you need doing is to fill up the petrol or diesel tank, pull the cord or press the starter button and you got the power needed. As long as you can keep putting petrol or diesel in it, it’ll keep running and putting out a lot of power and because they are mass-produced and simple to build, they are very cheap compare a solar generator of the same ability
We are aware of climate change due to pollen, aeroallergen levels are also higher in extreme heat and these can trigger asthma, which affects around 300 million people around the world.
The ongoing temperature increases and the atmospheric concentration of carbon dioxide due to burning of fossils fuels by all these generators and other greenhouse gasses had increased tremendously.
Heat and Pollution are getting worst all around the world especially in developing Countries thereby putting health in great danger. Respiratory and Cardiovasucler diseases are associated with air pollution.
Millions of Children die every year in the developing world because of pollution from burning petrol, diesel and gasses.
Seeing Children dying every blessed day in developing countries due to Carbon Dioxide Emission from Generators, other heat related illnesses, is a breath taking.
Carbon dioxide emissions from generators is causing people’s life especially the children and the elderly, mostly in developing world. This is because the electricity supply that would have helped a bit about the situation is poorly provided by the authority. The public is spending fortune in providing the basic energy needed for their daily life, thereby killing themselves gradually.
Some African countries has become dumping ground of generators of all kind. Many find it very difficult to sleep at night because of noise pollution from these generators. Carbon dioxide emission from these generators is wrecking its own havoc on the well being of these people.
In order to minimise the use of petrol or diesel generators and combat carbon dioxide emission, pace9 have brilliantly design a robust 2kva solar generator of its kind ELINA to save the planet and save lives

ELINA Solar Generator are made up of Photovoltaic (PV) Panels, Batteries, Charge regulator, and Inverter.
The PV Panels convert Sunlight into Electricity and sends it off to the Charge Regulator.
The Charge Regulator pumps the Electricity into the Batteries and stops it when they are fully charged.
The Inverter kicks in, takes the DC (direct current) Electricity from the Batteries and converts it into AC (alternating current) Electricity. This is the Electricity you need to power your home appliances just like you use your petrol or diesel generators.
It’s simple as that.
No moving parts but powerful Electricity is generated to power your entire home appliances
No petrol or diesel
No noise
No Carbon Dioxide emission – pollution
Using ELINA solar generator, we have to understand the amount of power this wonderful generator give per 24hr of the day and the amount of power our home appliances consume per 24hr of the day..
If we can have bit knowledge of a simple electrical terminology, we can maximise the power generated from ELINA solar generator.
Let’s have a quick overview of amps, amp-hours and watts calculation:-
The unit of electricity current is measured in Amp (A), or Ampere.
The electrical current is the rate of flow – how much can flow at once. To calculate the peak Amps you’ll need, find out the Amp rating of all the devices you’d want to run, add them up, and then look for an Amp rating that could run them all at once. The calculation might looks like this: TV Amps + Fan Amps + Fridge Amps … = Total Amps
An Amp hour is how much electricity can flow from the battery at a usable voltage, typically for a 24 hour period. You’ll often see it expressed as something like 100Ah. Divide that 100Ah by 20 hours. You’re left with 5A. The calculation looks like this: 100Ah ÷ 20h = 5A for 20 hours
A Watt (W) is the unit of measure for the amount of work 1 Volt (V) of electricity at 1 Amp (A) can do per second. Here’s the calculation: 1 Volt x 1 Amp = 1 Watt
When considering Watts, be careful!  Usually the Wattage rating that you first see is how many running Watts the generator can handle. Some electrical devices have a starting Watt rating that’s much higher than its running Wattage. For example Fridges.
Again, don’t bother yourself if you find it difficult for the calculation. Pace9 is there and always be there for you.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

We in pace9 uses the existing technology to design and build solar fridges.
Before we proceed further, let’s talk about International Space Station solar fridge and Emily Cummins fridge – you see, solar fridges have been around us for the past decade
Solar energy, often known as photovoltaics, is everywhere these days. Many of us especially areas were main grid continue to fail use it to power our homes. Solar panels sit top of buildings, homes and tents and power our electronic gadgets and the International Space Station (ISS). These technologies use photovoltaic (PV) cells to convert sunlight into electricity. When sunlight strikes a PV cell, it heats the cell up. Heating the cell causes electrons to knock loose, and these electrons are converted into a stream of electricity, or current.
The most common solar-powered refrigerators on the market today, uses this PV technology to power an otherwise mostly traditional refrigeration setup.
But one of the most recent developments uses “solar power” in a much more basic way.
We’ll take a look at both of these solar-powered refrigerators and find out why they are so unique. We’ll start with the SunDanzer, which is based on technology developed to provide air conditioning and refrigeration on the International Space Station
While developing solar-powered refrigeration systems for the International Space Station (ISS), a couple of NASA scientists decided the technology would do well in the Earth-bound world, too. Scientific-study outposts, eco-resorts, remote hunting cabins, street vendor food carts and areas of the developing world with no access to electricity could all benefit from solar-powered refrigeration. Not only food but also many medications and vaccines need a cool environment to remain viable. It’s a fairly essential technology.
Those NASA photovoltaics engineers created SunDanzer, a line of solar-powered refrigerators and freezers.
The SunDanzer refrigerator works a lot like a traditional one, which basically we have adapted using a vapor-compression system for cooling. Basically, a refrigerant gas like ammonia is compressed (placed under pressure), causing it to get hot; as it cools back down, it condenses into a liquid. When this liquid travels to a lower-pressure area, it expands and vaporizes. This vaporization absorbs heat, rapidly cooling the coils of the refrigerator.
This is how conventional refrigerator works. The difference between our main grid refrigerator and a solar-powered SunDanzer is that instead of running all the moving parts of the compression-expansion system by plugging into the main, you plug into a solar-panel setup. The system simply uses photovoltaic cells instead of the main electricity generated by coal or nuclear power.
To supply enough power to maintain that temperature, the unit’s solar panel needs about five hours of sunlight a day. But it can store excess solar-generated power so it’ll stay cold for a week without sunlight. And there’s the option of supplemental battery power so food will still stay cold in a pinch. Most solar-powered cooling systems come with this type of backup.
One solar-powered refrigerator model that does not have such a high-tech backup is the so-called “eco-fridge” developed by a 21-year-old student in Britain. That model has no moving parts at all.
When most of us think of “solar power,” we think of panels of photovoltaic cells. A refrigerator introduced in 2009 by British student Emily Cummins used a far more literal version of solar power.
Cummins’ refrigerator uses no photovoltaics, no electricity, no chemical refrigerant and no moving parts to produce a cooling effect. Instead, it uses an evaporative-cooling system based entirely on the sun’s heat and some water. It’s an ideal setup for African countries.
The fridge is brilliantly simple. It’s made of two cylinders, one inside the other. The outer cylinder can be made of almost anything on hand — cardboard, wood or plastic, typically, with holes in it to allow the greatest possible sun access. The inner cylinder is metal. The space in between the inner and outer cylinders is filled with materials like wool or sand.
The evaporative-cooling system works like this: You place food or medicine inside the inner metal cylinder and close it up. You then pour fresh water into the area between the cylinders, saturating the organic material, and place the whole setup in the sun. As the sun warms the outer cylinder and heats up the wet organic material, the water evaporates. Just like in a traditional fridge, evaporation removes heat (that’s why we sweat — when the sweat evaporates, we cool down). The organic material is touching the inner cylinder, so this heat transfer pulls heat from the inner cylinder holding the food or drink. The result is a very cold inner chamber.
This process is repeated as the water evaporates fully, so water is continually replenished and the cooling continues.
This system has no battery backup, so it relies on a good supply of sunlight which makes hot countries ideal candidates for this solar-powered setup.
There’s always the potential setback of any solar-powered necessity: Sunlight is seldom guaranteed.
In more high-tech PV refrigerators, backups in the form of batteries or generators are common in order to avoid system failure. The low-tech eco-fridge relies entirely on nature to keep things cold.
Don’t worry, we will meet your requirements.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

Solar street lights are independent of the utility grid. Hence, the operation costs are minimized Solar street lights require much less maintenance compared to conventional street lights. Accidents is minimized, since external wires are eliminated. No polluting in Solar Street Light Our Solar Street Light parts can easily be dismantled and carried to anywhere.
When we talk about Solar Street light, we are referring to a large selection of illumination which can be used in Streets, Highways, Roads, Bridges Car parks Assembling ground and General area lighting. We design Street Lights with or without a column. Our latest LED technology can illuminate large areas. These are zero maintenance! We also offer systems that can attach to an existing post or column so it is easier than ever to retro-fit your current lighting. All our Street Light can be DIY installed without the need of an electrician. Our latest Solar Street Light designs use wireless technology and fuzzy control theory for battery management. The lights using this technology can operate as a network with each light having the capability of performing on or off the network
Solar street lights consist of 5 main components:
Solar Panel – The solar panel is one of the most important parts of solar street lights, as the solar panel will convert solar energy into electricity. wattage systems.
Lighting Fixture – LED is usually used as lighting source of modern solar street light, as the LED will provide much higher Lumens with lower energy consumption. The energy consumption of LED fixture is at least 50% lower than HPS fixture which is widely used as lighting source in Traditional street lights. LEDs lack of warm up time also allows for use of motion detectors for additional efficiency gains.
Rechargeable Battery – Battery will store the electricity from solar panel during the day and provide energy to the fixture during night. The life cycle of the battery is very important to the lifetime of the light and the capacity of the battery will affect the backup days of the lights.
Controller – Controller is also very important for solar street light. A controller will usually decide to switch on /off charging and lighting. Some modern controllers are programmable so that user can decide the appropriate change of charging, lighting and dimming.
Pole – Strong Poles are necessary to all street lights, especially to solar street lights as there are often components mounted on the top of the pole: fixtures, panels and sometimes batteries. However, in some newer designs, the PV panels and all electronics are integrated in the pole itself. Wind resistance is also a factor. 
Each street light can have its own photo voltaic panel, independent of other street lights. Alternatively, a solar panel farm or a number of panels can be installed as a central power source on a separate location and supply power to a number of street lights
The solar street lights use solar energy, a form of the renewable energy. The solar street lights comprise of the photovoltaic cells, which absorb the solar energy during daytime. The photovoltaic cells convert solar energy into electrical energy, which is stored in the battery. At the night time the lamp starts automatically and it consumes the electricity already stored in the battery. During the day time the battery gets recharged and the process keeps on repeating every day.
Our Models of Solar Street Lights:
Sodium Vapor Lights: The sodium street lights use sodium in excited state to discharge the light. These lights comprise of the solar panels as usual that absorb the solar energy during the day, which is converted into electricity and stored in the batteries. At night time the sodium lamps consume electricity from the rechargeable battery. There is no wiring required for these lamps, they are very safe and can light the streets for up to 12 hours depending on the size of the solar panels and battery. The sodium solar street lights can be used for lighting streets, public places, residential areas, parks, plaza etc.

 Solar LED lights: LED stands for Light Emitting Diode. LED comprises of the chemical compound that give light when direct current from the battery passes through it. We have Solar LEDs in different sizes, shapes and styles. The life of our LED is very high up to 50,000 hours, which is equivalent to 10 years. Our LEDs require very little current hence we design the solar panels of smaller sizes for lighting the streets, public places, residential areas, car parks, plaza, estates etc

 Solar lights using induction technology: In this technique the lamps used in the solar lights do not contain the filament or the electrodes that tend to get damaged faster, thus ensuring very high life of the lamp. The life of the lamp in solar street lights based on induction technology can be more than 10, 0000 hours, which is almost 100 times the life of the incandescent lamps. These results in lower maintenance and electrical costs and fewer disturbances caused to the traffic on the road. Since these lights are based in induction technology, they generate lesser heat, thus permitting the use of aluminum reflectors that increases the intensity of the light produced by the lamp

Solar street lights are raised light sources which are powered by photovoltaic panels generally mounted on the lighting structure or integrated in the pole itself. The photovoltaic panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
We have ranges of solar street light to meet weather condition in any environment. Some of our solar panels turn on and turn off automatically by sensing outdoor light using a light sensor technology. Some are design with timer technology. Our Solar street lights are designed to work throughout the night. We usually use flat solar panels to installed Solar lights in windy regions to cope better with the winds.
With our experience in solar street light installation all over the world, we are able to minimised risk of theft in vulnerable areas.
We carried out street light maintenance as long as the customer want.
We are the best – pace9 – setting the pace.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

Solar Energy has been in existence for many million years, in-fact, since the existence of the Sun Recently, pace9 has become one of the leading Solar energy guru as we specialised in capturing the energy from the Sun by using our Solar Panels. These our Solar Panels consist of Photovoltaic cells which are generally made from silicon or other semi conductive materials that absorb and convert Sunlight into energy that can be transform to electricity.
Pace9 revolved in natural power. Our Solar Panels capture or harvest the energy from the mother nature (SUN) and turn it into electricity.
Our panel provides higher power demands and includes bypass diodes to minimise the effect of shadows and delivers maximum power in the smallest module size saving weight and space
Our panels are high efficient crystalline cell for all weather energy capturing, robust construction for outdoor and water resistant and for permanent fitting. Our panel is perfect for 5V to 240V appliances with 20 years warranty***

Send us your specification, we guaranty your power demand.
Send us your power demand we guaranty your perfect specification.
Pace9 setting the pace.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

Batteries store the energy harvest by solar panel from the sun, allowing the energy to be used as needed through an inverter. Note, not all energy harvest by solar panel must be stored in battery system before it can be used. Some energy harvest by solar panels are directly wired from the solar panel to the solar powered device. In this case, we are interested with the solar system that require a battery back up (or bank). With regards to the solar powered systems that require or utilize a battery, there are a few different types: 12-volt DC used for RV lighting and appliances.
Inverter battery systems that are capable of converting 12, 24, or 48-volt DC battery voltage into a 120- 240volt AC that can operate regular household appliances such as a refrigerator, water heater, TV, etc.
Hybrid solar power systems utilizes several energy providing components such as a battery bank powered by solar panels, solar array, generators, and wind turbine used to provide energy on a 24/7 basis.
When it comes to solar battery banks, each is designed for a specific charge or discharge level. Some are manufactured wet cells some are manufactured sealed or gel cells, each coming with their own set of requirements. For example, golf cart batteries come in a 6-volt wet cell with thick plates that are designed for hours of high volume discharge with a fast recharge and car batteries come with a thinner plate and their high volume discharge last only seconds and requires a longer period to recharge. When using a solar battery bank system, appropriate size and quality of battery for the amount of solar power it will be required to store is very necessary. They should be a deep cycle battery unlike the car battery, which is a shallow cycle. Using too small of a battery can be very dangerous.
When solar powered systems require a way to store the energy produced the battery comes into play.
As Solar system guru, we answer your solar system Power prayers.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

We derived pleasure from our customer’s happiness. The possibility of having the right inverter to meet individual customer’s Solar power need is our pride.
It’s unfortunate that most consumers do not have the right information from our competitors when it comes to installing solar power system for their domestic consumption.
Inverter is one of the vital parts of solar power system, though, it depend on the solar system required for the energy need.
Here in pace9, we design, build and install any solar power system, when taking specifications for consideration for solar system project, we have our three basic classifications of inverters if there’s need – Battery Backup Inverter, Stand-alone Inverter and Grid-tie Inverter.
Yes, before we go further in our almighty inverters, lets chat a little bit about it… (Solar Powered Inverters) Solar Powered Inverters have special functions adapted for use with photovoltaic arrays. The critical balance of system component in a photovoltaic system allows the use of electrical household AC powered equipments, like the TVs Fridges, Fans, etc…
Our harvested energy from the sun by solar panel is variable low voltage direct current (DC) while our alternating current (AC) is high voltage.
Today, most of our electrical equipment and appliances are AC, then, how can we change the harvested DC to AC uses. This tells us that we now have two energy to deal with.
To understand what we are dealing with, let’s first check out alternator – An alternator would have a coil of wire with a rotating magnet close to it. As one pole of the magnet approaches the coil, a current will be produced in the coil. This current will grow to a maximum as the magnet passes close to the coil, dying down as the magnetic pole moves further away. However when the opposite pole of the magnet approaches the coil, the current induced in the coil will flow in the opposite direction as we all know, as this process is repeated by the continual rotation of the magnet, an alternating current is produced. 
What about transformer? A transformer also causes an electric current to be induced in a coil, but this time, the changing magnetic field is produced by another coil having an alternating current flowing through it. Any coil with an electric current flowing through it will act like a magnet and produce a magnetic field. If the direction of the current changes then the polarity of the field changes.
The difference about transformer is that, the voltage produced in the secondary coil is not necessarily the same as that applied to the primary coil. If the secondary coil is twice the size of the primary coil, the secondary voltage will be twice that of the voltage applied to the primary coil. We can effectively produce whatever voltage we want by varying the size of the coils. 
This simple narratives tells that our inverters are coils, the amount of energy we need depend the size of coil required.
If we connected a direct current from a battery to the primary coil it would not induce a current in the secondary as the magnetic field would not be changing.
However, if we can make that direct current effectively change direction repeatedly by the use of a basic inverter, it would produce a square wave output as the current would be changing direction suddenly.
Some inverter would use transistors to switch the current, the switching transistors switches small current, (most likely DC) which is then convert by further transistor circuitry to bigger current (most likely AC)
A Solar Inverter or PV Inverter, converts the variable direct current (DC) output of a photovoltaic, PV solar panel into a utility frequency alternating curren (AC) that can be use for commercial electrical grid or off – grid consumption.
Battery backup inverters, are special inverters which are designed to draw energy from a battery, manage the battery charge via an onboard charger, and export excess energy to the utility grid. These inverters are capable of supplying AC energy to selected loads during a utility outage, and are required to have anti-islanding protection.
Stand-alone inverters, used in isolated systems where the inverter draws its DC energy from batteries charged by photovoltaic arrays. Many stand-alone inverters also incorporate integral battery chargers to replenish the battery from an AC source, when available. Normally these do not interface in any way with the utility grid, and as such, are not required to have anti-islanding protection.
Grid-tie inverters, which match phase with a utility-supplied sine wave. Grid-tie inverters are designed to shut down automatically upon loss of utility supply, for safety reasons. They do not provide backup power during utility outages.
Don’t forget, let us know your energy need we will provide you with best inverter specification.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

Storing the energy we harness from the sun through Solar PV system has become increasingly important in order to maximise self-consumption, with more consumers wishing to rely less on the national grid and in some cases where national grid doesn’t exist.

The demand for Solar Energy Storage System has grown considerably as our customers and future clients look to reduce energy bills further and become more aware of managing energy requirements. 

Currently, there are different Storage System in the market today. However, most of the products you will find are awkward to locate within a property due to the size and rating or the product in order to work efficiently, and more importantly work safely with the occupants in close proximity. 

Pace9 have spent considerable time researching the market all over the world to find the best quality Storage System we believe to be leading the way in developing this Technology but it appears we have hit the rock. Hence, pace9 have decided to set the pace to revolutionised Solar Storage System that is Safe, Reliable with more than 10 years battery life and over 10,000 cycles. Intelligently designed and build to maximize harvested energy and battery life.
The sophisticated design of our Solar Storage System allows easy incremental expansion as your energy needs increases. This means that you can start small and grow your system as your requirements change. Each of our Storage system stores up to 2kWh of electricity and you can keep adding to your system as you see fit. Each of our battery storage system has a 98% depth of discharge, meaning you can use 98% of the solar energy you have collected.
When we talk about pace9 Solar Storage System, a lot of component combined to make up one unit. We mostly used this system of solar storage when we are dealing returning unused harness energy back to national grid, although, we are increasingly using this storage system in areas where no national grid exist. 
The All In One pace9 Solar Storage System, enhances energy efficiency through a simple direct current system and offers the convenience of compact design and easy installation. The direct current system only has to convert electricity once from Solar Panels on the rooftop before its use for home appliances, thereby increasing the energy efficiency. The compact design lets it fit in any storage room such as garage, kitchen, or even living room so you can experience the difference between pace9 and others.
As we equip photovoltaic installations with a storage system we increases the on-site consumption of generated solar power and same time attain the ability for multiple uses. In addition to allowing photovoltaic installations to significantly increase on-site consumption, a storage system also enables them to reduce their dependency on utility companies and ensures that power will continue to be supplied without interruption should the public power grid temporarily fail.
Solar storage systems have long been common practice in off-grid photovoltaic installations (otherwise known as stand-alone solutions) in order to ensure that power is continuously supplied without interruption. In contrast, the use of storage systems in grid-connected solar installations, which are the norm for installations on private roofs and commercial businesses, is still a relatively new phenomenon. Electricity storage systems that are available on the market are suitable for use when retrofitting existing photovoltaic installations and can also be factored into the system design when planning new installations. All storage systems save excess energy and put it at the disposal of consumers at a later point in time.
Solar modules generate direct current, which is converted into alternating current by an inverter before being fed into the public power grid or being used by domestic power consumers. Battery storage systems can be integrated into both the direct current and alternating current sides of the installation.
Knowing your energy need, we have a good knowledge of the type of solar storage system required before construction works begin, the system will normally be integrated into the direct current side of the installation. This reduces investment costs, achieves a higher efficiency, and allows module output and storage capacity to be coordinated with each other in the system design. Specific inverters with an integrated charge and discharge control directly charge the (integrated) battery with solar energy. They also convert it into alternating current if the temporarily stored solar energy is to be used by power consumers at a later point. In principal, it is possible to integrate storage systems into the direct current side even when retrofitting existing installations. If the inverter present does not have the necessary configuration, then the battery can also operate with the help of an external charge controller.
Solar Storage System uses a specific battery inverter for the storage system to be integrated into the alternating current circuit. This inverter converts alternating current into direct current, which is required for charging the accumulator.

Let us know your energy needs – 020 8855 7117 – we will analyse and advise on specification
Not only advised and specification, we design
Not only design, we build.
Not only build, we install.
Not only install, we maintain
Not only maintain, we will be with you all the way.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

As one of the leading manufacturers of Solar Panels, expertise, professionalism and experience has made us the best in solar panel fitting and installation to any roof and surface in the planet.
We have ranges of solar panel fittings for any surface, (smooth, rough, bumping or curve) from a removable or mobile position to a permanent position from single panel to multi-panels.
Our panel fittings are of high quality material to withstand all weather condition and long term warranty
There different type of roof and we have different options for fitting solar panels in them.
This is one of the permanent fitting positions for multi panels with high power output in some roofs.
On plain tile and zinc roofing which is most common roofs, solar panel installation onto them is a straightforward process as they can be removed and reinserted easily. It is one of the interlocking methods we apply when installing multi solar panels for high energy harvest on zinc or tile roofing system. This involves using roof brackets (“anchors”) made of stainless steel or aluminium and they fasten directly to the timbers that make up the roof structure.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.

The cable used for wiring the DC section of a grid-connected wind or PV system need to be selected to ensure that they can withstand the environmental, voltage and current conditions at which they may be expected to operate, including the heating effects of both current and heat from the Sun.Double insulated single core cable for use together with polarized weatherproof DC connectors to allow fast, easy connection of solar modules, speeding installation time and eliminating wiring errors.
Charge Controllers:
Solar photovoltaic charge controllers or voltage regulators control the amount of energy from the solar PV panels going into the batteries or storage system. In particular they protect the batteries and storage system from overcharging, subsequent gassing, loss of electrolyte and possible plate damage
Pace9 is solar energy guru, give us a call we will detach you from the main grid and be energy independent for life.
For more information
Just give us a call +44 (0)208 855 7117
or contact us.