solar system kit accessories


10k Solar Hub


REF. No: PN10KSH


The 10k pace9 Solar Hub has 5 power ports; 2 x 12v ports for both bedroom light and 3w – 15w pace9 LED bulb, 2 x USB ports for charging your Gadgets and 1 x 12v auto socket for powering Fan, Air pumps, 12v TV’s, DSTV decoder, lap top computers etc.
f you are looking for more power, the pace9 10K, which already has a mighty 10Ah at 12v can be expanded up to three times using the pace9 Expansion Pack. Each pack interconnects and shares power from one of more solar panels.
To replace the Battery or any of the Hub component, please, call pace9 on:
+44 (0) 20 8855 7117 Or Email: sales@pace9.com

pace9 10ah pace9 solar hub

20wp Solar Panel


REF. No: PN20WP


This 20wp Solar Panel is designed to fully charge the pace9 10K Solar Hub within 8 hours of sun light of about 21 degree and above.
If you need to charge your pace9 10K Hub less than 6 hours of the above sunshine, you can double the Solar Panel or Triple the Panel for faster charging
The Panels are pre-wired for expansion, hence, all you have to do is to connect to each other

pace9 20wp solar panel

10k Fan


REF. No: PN10KFAN


This Ultra Silent Fan will provide you with a cooling environment and quiet all night sleep for those that need it for night and peace of mind. This 12v Fan is a superb metal frame with 12 inch metal blade Table fan design for ultra quiet-low power and strong wind, comfortable for all night sleep in a hot atmosphere. The auto plug should be connected into the 12v socket on the Pace9 10K Solar Hub and operated either by its own ON/OFF switch or from the Solar Hub.

pace9 Fan

Bulb Splitter Cable


REF. No: P9SSC


This is a pre-wired switch bulb holder designed to split cables to enables you to extend light to other part of your apartment by plug in to an extension cable.
This splitter bulb holder can as well inter-connect to each other with individual switch operative. Note: This Bulb Splitter Cable, cannot be connected to the hub directly, hence, Cable #02 will do the job from the hub to the Splitter Cable and the special design 5m and 10m cable #01 extension will enables separation of each bulb holder to different destination of your choice.
Screw in any of the 12v LED bulb (3w or 9w) and use the individual switch on the Bulb Holder for off/ON
These cables are highly and professionally insulated flexible cable for high performance.

pace9 bulb holder splitter cable with switch

3w 12v Bulb


REF. No: PN3WB


This is a high efficient 12V LED 3w bulb, screw it to the lamp holder and use the lamp holder switch on/off for the bulb.
This 3w bulb is cabable of illuminating area up to 80m2
The 3w LED is part of the pace9 10K kit

pace9 12V LED 3w Bulb

9w 12v Bulb


REF. No: PN9WB


This is a high efficient 12V LED 9w bulb, screw it to the lamp holder and use the lamp holder switch on/off for the bulb.
This 9w bulb is cable of illuminating area up to 160m2

pace9 12V LED 9w Bulb

3w bulb with 5m splitter cable


REF. No: P9SC3W


This is pre-wired 5m cable attached to the splitter cable with 3w LED bulb, ready to use with Pace9 Solar system
This item comes in 3m, 5m and 10m

pace9 3w bulb with 5m splitter cable

9w bulb with 5m splitter cable


REF. No: P9SC9W


This is pre-wired 5m cable attached to the splitter cable with 9w LED bulb, ready to use with Pace9 Solar system
This item comes in 3m, 5m and 10m

pace9 9w bulb with 5m splitter cable

3w LED Strip Light


REF. No: PN3WSTRIP


This is one of our ranges of LED light as we are striving to perfect illumination to the highest standard possible
This flat 3w LED strip is ideal for garages and retail shops.
Connect to the splitter cable and you are done.

pace9 3w LED Strip Light

Cable #01 Extension Cable 5m


REF. No: P9PEC/LHEC


This is a cable to extend the already wired 20wp Solar Panel to the Pace9 10K Hub.
If the 5m cable is not enough to get to the position of the Hub, more can be added to extend the length of the cable.
This cable comes in 2.5m, 5m and 10m

pace9 Cable #01 Extension Cable 5m

Cable #02 Light Cable 5m


REF. No: P9CCFHTSC


This is a 5m cable to connect the Splitter Lamp Holder to the Hub. The Splitter Lamp Holder for the LED lights (3w, 9w or 15w) cannot be connected to the hub directly, hence, this 5m cable will do the connection from the hub to the splitter lamp holder.
This cable is included in the pace9 10K Solar System
This cable comes in 3m and 5m

pace9 Cable #02 Light Cable 5m

Lamp Holder Extension Cable


REF. No: P9SLHEC


This is a cable to extend the Splitter Lamp Holder to others. If the 5m cable is not enough to get to the position of another lamp holder, more can be added to extend the length of the cable.
This cable comes in 2.5m, 5m and 10m

pace9 Lamp Holder Extension Cable

Bedroom Light


REF. No: PN1WBRL4M


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque pretium, nisi ut volutpat mollis, leo risus interdum arcu, eget facilisis quam felis id mauris. Ut convallis, lacus nec ornare volutpat, velit turpis scelerisque purus, quis mollis velit purus ac massa.

pace9 Bedroom Light

Splitter Cable


REF. No: P9BRLSC


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque pretium, nisi ut volutpat mollis, leo risus interdum arcu, eget facilisis quam felis id mauris. Ut convallis, lacus nec ornare volutpat, velit turpis scelerisque purus, quis mollis velit purus ac massa.

pace9 Slitter Cable

5m Light Extension Cable


REF. No: P9BR5MEC


5m bedroom light extension cable:
This is to increase the cable length from splitter cable to another bedroom light.
This only comes in 5m

pace9 5m Light Extension Cable

USB Extension Cable


REF. No: P9USBEC


This is a USB extension cable to increase the cable length from pace9 10K Hub to the position of any of the 10K accessories using USB.
This cable comes in 5m and 10m

pace9 USB Extension Cable

Reading Fan


REF. No: P9RF


This is a superb metal frame with 6 inch metal blade mini fan design for ultra quiet-low power and strong wind, comfortable for all night reading in a hot atmosphere/p>

pace9 Reading Fan

Reading Light


REF. No: P9RL


This bright 2.5w LED reading lamp gives the reading comfort you can ever think of
It has three different illumination brightness adaptable to individual sightedness

pace9 Reading Light

12v Decoder Cable


REF. No: P9DC


This cable is specially made for 12v decoders for cable and satellite decoders for TV users
Decoders like DSTV or GOTV and some others are compactable to all pace9 solar hub with this cable.
Plug to 12v socket of the pace9 hub and to your decoder, you are back to your normal power supply

pace9 12v Decoder Cable

10k Hub Connection Cable


REF. No: PN10KHCC


This pace9 10k hub connection cable is use to join two to three pace9 solar hub together for more power according to your need
It’s free when you buy extra pace9 10k Solar Hub

pace9 10k Hub Connection Cable

Panel Pole Bracket


REF. No: P9PPMB


There are numerous pace9 panel pole brackets available to fix the solar panel to the pole should more permanent installation be required
This particular bracket is designed to mouth the 20wp to 60wp Solar Panels to the pole.

pace9 Panel Pole Bracket

Hub Wall Bracket


REF. No: PN10KWB


This pace9 10k wall bracket is to mouth the solar hub on the wall and hold it firmly if the option is chosen.

pace9 Hub Wall Bracket

12v Laptop Adaptor


REF. No: P9LPA


This is available for most lap tops, connects the 12v laptop adaptor into pace9 hub’s 12v auto socket and you are back on track.
Unfortunately, we do not stock this item because charging pins of Laptops differs from each other.
You can buy 12v laptop adaptor from your laptop manufacturer to ensure you have the right one for your laptop

pace9 12v Laptop Adaptor

AC Mains Adaptor


REF. No: P9ACC


Complete kit of pace9 products are dual solar system which means the power hub can be charge by the mains and solar panel. Plug the 3 pin adapter into any electricity 3 pin wall socket and connect to the back of pace9 hub solar for rapid charging, if necessary.

pace9 AC Mains Adaptor